Conventional steady-state tests sets are only capable of testing each component of the system individually, therefore it becomes very difficult to predict the behavior of the entire system when subjected to true power system events. This results in performance uncertainties and could be the cause of misoperations.
A precise simulation of real power conditions can be achieved with the satellite synchronized testing of the Doble F6150 Relay Testing System. Get a uniform and comprehensive scheme test, reducing the testing time significantly to achieve results that are reliable and accurate. Easily confirm the correct operation, settings and configuration of the necessary relay or protection scheme. Test data can be used to evaluate future protection scheme or relay operations as the test results are an indicator of the protection scheme’s behavior under real power conditions.
The Doble F6150 Relay Testing System comes packed with many features and benefits. It is the only device to perform test flexibility that allows for the testing of all sorts of relays and protection schemes. It has 6 independently controlled as well as direct coupled power sources each of which has a 150VA rating at 0-30A. With these, almost 100 test configurations are provided to select from, to suit the requirements of any protection scheme or relay. Test a complete line relay or protection scheme back to back by configuring each source as 2 independent 75VA power sources, to reach total 12.
The Doble F6150 Relay Testing System can be operated through a PC interface which could be serial or Ethernet to get a dynamic and steady state as well as transient testing. Control all the sources straight from the PC and easily configure each test, making the testing process very easy and simple.
Also refer to the following products:
Doble F6150e Relay Testing System
Doble F6150SV Relay Testing System
Rent the Doble F6150 from Protec, the electrical test and measurement equipment rental experts.
