
Doble TDR9000 specifications:
Motion Channels
Number of Channels: |
3 – up to 9 with ganged units |
Connector: |
15-pin “D” |
Voltage Isolation to Chassis: |
1.0 kV |
Event Channels
Dual function, Analog or Auxiliary, user programmable
Number of Channels: |
6 – up to 18 with ganged units |
Analog Measurement Channels
Maximum Input Voltage: |
± 300 V |
Input Impedance: |
1 MΩ |
Resolution: |
12 Bit |
Number of Ranges: |
Ten 0.2 to 300 V |
Analog Accuracy: |
± 1% of reading, ± 1.5% full scale offset |
Voltage Isolation to Chassis: |
1.0 kV |
Auxiliary Contact Channels
Sense Mode: |
Voltage Sense/Contact Sense |
Maximum Input Voltage: |
± 300 V |
Open Circuit Voltage: |
30 V ± 10% |
Close Circuit Current: |
28 mA ± 10% |
Voltage Isolation to Chassis: |
1.0 kV |
Digital Linear/Rotary Motion Transducer
|
Linear |
Rotary |
Range: |
0.0 to 40.0” |
0.0 to 2880.0° |
Accuracy: |
+/0.1% of the value +/0.1” max error |
+/0.1% of the value |
Measurement |
|
|
Resolution: |
0.00125” |
0.09° |
Velocity: |
50 ft/s |
120 rev/s max |
Acceleration: |
1200 g for 50 µs max |
30×106°/s2 max |
General
Recordings: |
25 seconds (all channels at max resolution) |
Communication: |
USB or Ethernet |
Safety: |
Safety Ground |
Pending Certifications: |
CE, C Tick, CSA Compliant |