Reliable Insulation Testing with Megger’s MIT525 and MIT1025

If you are looking for a reliable insulation tester, consider Megger‘s MIT series. Capable of conducting various tests on cables, transformers and motors insulators, the meters are rated CATIV 600 Volts on all terminals and an Ingress Protection 65.

Megger MIT525 5-kV Insulation Resistance Tester

Megger MIT525 5-kV Insulation Resistance TesterThe Megger MIT525 can conduct automatic Step Voltage, Ramp and Dielectric Discharge tests. It also features a real time clock and PC connectivity through USB and RS232 ports. The PC connectivity allows advanced results analysis using the PowerDB Lite software.

Megger MIT525 5-kV Insulation Resistance Tester features:

– Analog and Digital display
– Operation through batteries or through AC mains
– Variable voltage from 50 Volts to 1 kiloVolts at 10 Volts increments
– Variable voltage from 1 kiloVolts to 5 kiloVolts at 25 volts increments
– Measurement of voltage, capacitance, time constant and leakage current
– Automatic Insulation Resistance, Polarization Index, Ramp, Step Voltage, Dielectric Discharge  and – Dielectric Absorption Ratio testing
– Built-in timer control and display
– 3 milliAmpere test current
– Measurement of resistance from 10 kΩ to 10 TΩ
– USB and RS232 ports
– Real time clock
– Alarm limit mode
– 3 milliAmpere noise rejection
– 2 percent error guarding 500 kΩ leakage with a 100 MΩ

Megger MIT1025 10-kV Insulation Resistance Tester

Megger MIT1025 10-kV Insulation Resistance TesterThe Megger MIT525 is like the Megger MIT1025 when it comes to features but has a higher test voltage output and a wider range of resistance measurement.

Megger MIT1025 10-kV Insulation Resistance Tester features:

– Analog and Digital display
– Operation through batteries or through AC mains
– Variable voltage from 100 Volts to 2.5 kiloVolts at 10 Volts increments
– Variable voltage from 2.5 kiloVolts to 10 kiloVolts at 25 volts increments
– Measurement of voltage, capacitance, time constant and leakage current
– Automatic Insulation Resistance, Polarization Index, Ramp, Step Voltage, Dielectric Discharge  and – Dielectric Absorption Ratio testing
– Built-in timer control and display
– 3 milliAmpere test current
– Measurement of resistance from 10 kΩ to 20 TΩ
– USB and RS232 ports
– Real time clock
– Alarm limit mode
– 3 milliAmpere noise rejection
– 2 percent error guarding 500 kΩ leakage with a 100 MΩ

Megger is one brand you can count on, and Protec offers for rent, lease or purchase, all the electrical testing equipment you need to get the job done.