Megger MIT525 and MIT1025 Offer Numerous Features for Quality Insulation Testing

  • Uncategorized

Megger MIT1025 10-kV Insulation Resistance TesterIf you are looking for a reliable insulation tester, check out Megger‘s MIT series. The Megger MIT525 and MIT1025 perform spot tests, stepvoltage tests, dielectric discharge tests, ramp tests, and dielectric absorption tests and offer the following features and benefits:
• Smaller size and lighter weight allowing for easier transport and use without compromising performance.
• High measurement range enables installation testing and long-term trending of higher value apparatus.
• Unique dual case design allows for fire-retardant protection while maintaining ruggedness.
• High-quality, flexible silicon test leads meet safety regulations of IEC 61010-31:2008 while ensuring measurement accuracy.
• Timed IR plus PI, DAR, DD, SV and ramp tests maximize diagnostic testing capability.
• Operate from line power when battery fully discharged (charges while operating).
• Two and one-half hour full battery charge time (one-half hour charge for one hour testing) significantly increases productivity.
• Up to six hours continuous testing (5 kV) on a single battery charge.
• Industry best guard terminal performance to insure highest accuracy of measured values.
• Enhanced driver technology provides plug-and-play when connected to the internet. No tedious and potentially interruptive setup procedures.
• Dedicated voltmeter function (30 V to 660 V) with frequency measurement allows the user to check for induced voltages.
• CATIV 600 V safety rating on all terminals allows for safe use in the widest range of applications.
• Large LCD with automatic backlight.
• Noise filter rejects up to 3 mA noise for effective operation in electrically noisy environments.
• High altitude operation up to 3000 m while maintaining CATIV 600 V rating.
• Rotary switch operation for easy, intuitive field use.
• Field replaceable battery.
• Locking test leads provide additional safety.
• 3 mA short circuit current with unique max power regulations technology ensures maximum transfer whatever the load until selected voltage is reached.
• 5% accuracy all the way up to 1 T-ohm at 5 kV and 2 T-ohm at 10 kV ensures highest accuracy where it matters most.
• Date and time-stamped test results reduce the risk of error in result interpretation.

Megger is one brand you can count on, and Protec offers for rent, lease or purchase, all the electrical testing equipment you need to get the job done.