Skip to content

Megger DET4TCR2 Ground Resistance Test Kit Specifications

  • Uncategorized
Megger_DET4TCR2

The maintenance of an adequate low resistance ground connection is essential to both the protection and performance of any electrical system. Ground testing should be performed both upon installation, to meet design specification, and periodically thereafter in order to maintain service.

The Megger DET4TCR2 Ground Resistance Test Kit can perform bonding tests (using an ac signal), to determine that adequate connection has been made from equipment to the grounding system, and can perform soil resistivity tests.

 

Megger DET4TCR2 Ground Resistance Test Kit Specifications

Resistance range: 0.01 to 200 kΩ autoranging

Resistance accuracy:

2P measurements 2% ±3 digits

3P measurements 2% ±3 digits

4P measurements 2% ±3 digits

ART measurements 5% ±3 digits

Stakeless measurements 7% ±3 digits

Maximum probe resistance:

Rp limit: 200kΩ (50V output voltage)

Rc limit: 200kΩ (50V output voltage)

Limits reduced to 100kΩ for 25V output voltage

Limits reduced to 5kΩ for 0.01 Ω resolution

Earth voltage range: 0 – 100 V

Earth voltage accuracy: 2% ±2 V

2-wire test: Yes

3-wire test: Yes

4-wire test: Yes

Stakeless test: Yes

Ground current range (with current measuring clamp): 0.5 mA to 19.9 A

Ground current accuracy: 5% ±3 digits

Display: 3-1/2 digit high contrast LCD, backlit

Test frequency: 94, 105, 111 and 128 Hz

 Test voltage: 25 V or 50 V, user selectable (factory setting 50 V)

Test current: 450 micro-amps at 25 V or 50 V (selectable), 4.5 mA at 25 V

Noise rejection: 40V pk to pk

Noise check: Automatic

C spike check: Automatic

P spike check: Automatic

Battery type: 8 1.5 V AA NiMH rechargeable cells

Battery life: 3 hours, 700 consecutive tests

Safety: EN61010-1 CAT IV 100 V

Terminals: 4 mm plug type (test leads)

Ingress protection: IP54

EMC: Meets the requirements of EN61326-1:1998 for use in heavy industrial areas, including amendment 1

Dimensions: 8 x 5.7 x 3.2 in. (203 x 148 x 78 mm)

Weight: 2.2 lb (1 kg)

Operating temperature range: 5º to +131º F (-15º to +55º C)

Storage temperature range: -40º to +158º F (-40º to +70º C)

Humidity: 95% RH non-condensing at 104º F (40º C)

 

Megger is one brand you can count on, and Protec offers for rent, lease or purchase, all the electrical testing equipment you need to get the job done.


Visit Our Website