Relay Test

Rent the Megger SMRT410 Multi-phase Relay Tester Today from Protec

October 2, 2015
Megger, Relay Test, Rent Electrical Test Equipment

The Megger SMRT410 Multi-phase Relay Tester has the “smart” combination of high compliance voltage and high current output to test all electromechanical, solid-state and microprocessor-based overcurrent relays, including; voltage controlled, voltage restraint and high impedance directional ground overcurrent.

The Megger SMRT410 Multi-phase Relay Tester provides a complete multi-phase test system for commissioning of protection systems. With up to 4 voltage channels and 6 high current channels, the SMRT410 meets every testing need.

Measure Electromagnetic Earth Fault Relays with the Doble F6150

August 31, 2015
Doble, Electrical Test and Measurement Equipment, Relay Test

The Doble F6150 Relay Testing System can be used to measure the majority of relays.

And while it is capable of measuring high-burden electromagnetic earth fault relay, it is also sophisticated enough to complete advanced multi-functional numerical microprocessor protection schemes. It can do that without any additional devices, making the Doble F6150 Relay Testing System very popular for relay testing.

Doble Family of F6150 Relay Testing Systems are All-In-One Solutions

November 10, 2014April 17, 2020
Doble, Doble F6150, Relay Test

The Doble family of F6150 Relay Testing Systems are versatile, all-in-one solutions for testing protection relays and schemes, and capable of performing the most simple through the most complex tests.

End-to-End Testing Made Easy with the Doble F6150 Relay Testing System

October 6, 2014April 17, 2020
Doble, Doble F6150, Relay Test

With the Doble F6150 Relay Testing System, end-to-end satellite synchronized testing is very simple and easy. There’s no elaborate test set up, and all the required software is in the F6150 instrument. Only a GPS antenna with an access to open sky is required. If access to the sky is not possible, use of the optional F6050 high precision time synchronizer unit which simulates a GPS signal. So no matter the location, state-of-the-art end-to-end tests can be performed.

Doble F6150 For All Your Relay Testing Needs

July 30, 2014April 16, 2020
Doble, Power Factor Testing, Relay Test

If you need a solution for relays and protection schemes, you want testing equipment that offers high power, flexibility and advanced technology to perform testing with ease.

Keep Relays Working Properly With the Doble F6150 Relay Testing System

January 27, 2014
Doble, Doble F6150, Relay Test, Rent Electrical Test Equipment, Three Phase Relay Testing

Relays should be kept in proper working condition to ensure electrical safety and reduce possible damage to other devices. Relay test sets are equipment used in testing relays by applying sufficient current to simulate specific conditions, assuring that the relay is operating correctly.

Assure Proper Working Condition of Protective Relays with the Doble F6150

January 2, 2014
Doble, Doble F6150, Relay Test, Rent Electrical Test Equipment, Three Phase Relay Testing

A protective relay is designed to calculate operating conditions on an electrical circuit and trip circuit breakers when a fault is detected. Relays should always be kept in proper working condition to ensure electrical safety and reduce possible damage to other devices.

Highly Versatile Relay Testing With the Omicron CMC 356

December 16, 2013
Omicron, Relay Test

Relays are frequently found in high voltage or medium voltage power systems. With usage the relay connections deteriorate or get contaminated. Therefore, it’s in the interest of both the end user as well as the manufacturer to check the behavior of relays periodically.

The Omicron CMC 356 Universal Relay Test Set and Commissioning Tool’s analog test signals are generated digitally using DSP technology. This, in combination with the use of additional error correction algorithms, results in accurate testing signals even at small amplitudes.

« Previous
1
2
3
4
5
6
…
12
Next »